|
The four PCB spacers/fixings in each kit are fitted with double sided self adhesive pads, This makes a very strong fixing if used on a clean surface. Because of the large surface area of the fixings they can be cut to allow a PCB to be fitted against the back and side of the box that is used. The PCB is spaced 6mm from the base and the hole size needed in the PCB is 4mm, The PCB can be up to 2mm thick. When the PCB is pushed on to the fixing a sprung lever is released on top of the PCB to hold it in place. To remove the PCB these levers need to be pressed in. The self adhesive feet are transparent and are 7mm diameter and 2mm high. Each kit is as shown in the main photo (4 x fixing plus 4 x feet) and you get 3 lots for £0.99 (12 x fixing plus 12 x feet) (all content is the responsibility of the poster) |
e_bright@oklahomaselltoday.com (Evelyn Bright) for more information. All emails will be forwarded to the poster's actual email address.